YN-C807 Li Ba Leak Stopping Waterproof Mortar

1. Rapid setting with high strength, micro-expansion, strong adhesion, and high impermeability;
2. Quickly integrates with the substrate to form a single unit, and is not prone to aging;
3. Easy to use, can be used for both water-facing and water-backed surfaces to achieve leak stopping and waterproofing.

1. Unopened products should be stored in a dry, cool, and well-ventilated place;
2. Under normal storage and transportation conditions, the shelf life is 12 months from the date of production.

1. Leak stopping for water seepage in basements, bathrooms, ponds, tunnel culverts, reservoirs, dams, and roofs.
2. Emergency repair of various pressure pipes and emergency installation leak stopping for mechanical equipment.

1. The Leak Stopping Agent should be mixed in a ratio of material to water of 1:0.25 and kneaded into a lump. To ensure the rapid setting property of the material, when the ambient temperature is below 10°C, use warm water for mixing.
2. Moisture conservation and curing: After the coating hardens, immediately perform moisture conservation and curing to prevent chalking. Methods of curing include spraying water, covering with a wet cloth, etc. The first curing should be done carefully to avoid damaging the coating. A total of 2-3 days of curing is required. In humid areas, natural curing is possible.

1. This product is easy to absorb water and moisture, so it should be used up in one time after opening.
2. This product should be applied in an environment with a temperature range of 5~40°C.
3. This product generates a lot of heat during curing, so attention should be paid to prevent burns.
4. If this product splashes into the eyes, it may cause irritation. Please rinse with clean water immediately.